Viper Model 330V - Manual (Page 14)

11 © 2005 directed electronics, inc.
programming options
Programming options control your system's normal, operational set-up.
Most options do not require additional parts, but some may require
installation labor.
programming settings
The following is a list of the program settings:
1. A Accttiivvee or passive arming (automatic arming 30-seconds after
closing the last door).
2. Arming/disarming confirmation chirps o on n or off.
3. Door Trigger Error Chirp o on n or off.
4. Ignition-controlled domelight o on n or off.
5. P Paan niicc/Auxiliary Channel: This unit has the ability to control
an optional accessory by pressing the door lock button twice.
If the auxiliary feature is activated and optional accessories
are not installed, the system will not respond to pressing the
lock button twice. In p paan niicc mode pressing the lock button
twice will activate panic mode.
6. A Au uxxiilliiaarryy O Ou uttp pu utt or Delayed Auxiliary Output (Installer only).
7. Door Trigger d deellaayyeed d or instant: In the d deellaayyeed d configuration
the unit will provide a progressive response if the door is
opened while the system is armed. The system will chirp and
nnoottee:: Settings 6 and 11 are to be set by the installer.
nnoottee:: Factory default setting is shown in bboolldd.