VIEWSONIC VNB100 Netbook VS12570 - Manual (Page 31)

ViewSonic VNB100
22
10. Appendix
10-1 Troubleshooting
Q1：How to turn off the Notebook PC when the halted system cannot warm boot?
A：Press the POWER button and hold 4 or 6 seconds to turn off the Notebook PC.
Q2：How to check the Notebook PC if the Notebook PC cannot be turned off?
A：1.If the power is low, connect to the electric outlets.
2.Check that the video display system is not in the external monitor mode.
3.Make sure the indicator of the adapter turns on and the adapter works well.
4. Remove the U disk, SD card and any other external device.
Q3：If the water come into the Notebook PC
A：1. DO NOT turn on the Notebook PC.
2. Disconnect the outlet cable and detach the Battery Pack in order to turn off the Notebook
PC, instead of pressing the POWER button to turn off it. Disconnect all external devices.
3. Spill out the water from the Notebook PC. Use a soft and waterish paper or cloth to wipe
the surface of the Notebook PC lightly.
4. Use the fanner to dry the Notebook PC and the accessories, and then send to the service
center for advice.
5. DO NOT place the Notebook PC into the dirty carrying case to again.
Q4：How to prolong the life of the Battery Pack?
A：1. Adjust the brightness of the LCD Screen to proper level.
2. Turn down the volume.
3. Make the appropriate setting in the Power Management menu.
Q5: If the image isn’t clear
A: Check that the lens is clear or not, if not, clean with the soft cloth.
Q6: If the mobile moves slowly
A: The camera needs some light when gathering the data and the speed will be slow if the light
condition isn’t good. Please adjust the screen position of the Notebook PC or the position of the
user.
The image display also shall be slower by the heavy loading for the system when the many
applications are running. Please close the unused procedure.
Note:
Q5 and Q6 are the questions when you are using the camera for video capture,
conferencing, and chatting.