Operations – VocoPro DA-1055 PRO User Manual

Page 12

Basic Operations

ATTENTION:

Before turning on the DA-1055 PRO’s power, make sure it is connected to a power outlet, power

strip or surge protector. It is recommended that you use a surge protector for increased protection.

1.Turning on the Power

Switch the

POWER button on the front panel of the DA-1055 PRO to the ON position to turn it on and

switch it to the

OFF position to turn it off.

2.Turning on the EQ channels.

Each

EQ channel, Left and Right, can be turned on and off individually using the white EQ on buttons.

For each

EQ Channel:

1. Press the

EQ ON button in to turn on. The green LED indicator will light up when it is on.

2. Press the

EQ ON button again to turn off. The green LED indicator will turn off.

3.Using the Vocal Cancel Feature

Vocal Cancel eliminates the vocal track on Multiplex formatted

CD+G discs allowing the singer to sing along

to music only. The

VOCAL CANCEL button is located on the front panel of the DA-1055 PRO.

NOTE: Make sure that your CD+G disc is Multiplex formatted or else you will not be able to cancel the
vocal track.

1. Press the

VOCAL CANCEL button IN to turn on the Vocal Cancel feature.

2. Press the

VOCAL CANCEL button OUT to turn off the Vocal Cancel feature and return to normal mode.

4.Switching Between Input Channels

If you have two source players connected, you can only play one at a time. When playing one, you must set the

DA-1055 PRO to the correct input channel using the SOURCE button on the front panel.

1. Press the

SOURCE button IN to turn on the CDG channel.

2. Press the

SOURCE button OUT to turn on the DVD channel.

Operations