Viper 120HV User Manual

Page 15

2003 Directed Electronics, Inc.

The Valet

Take-Over feature allows the vehicle to remain running

after the key has been removed from the ignition. This feature is

useful for occasions when you wish to exit and lock the vehicle for

short periods of time, but would like to leave the motor running

and the climate controls on.

To perform Valet Take-Over:

1. Before turning off the engine, press and release

twice

within 2 seconds (or press and release the optional Momen-

tary switch).

2. Turn the ignition key to the OFF position.

(The engine will stay running.)

3. The engine will run until the pre-programmed time elapses or

a shut-down input is received. (See the previous Remote Start

section for a complete list of shut-down inputs.)

NOTE: This feature will not work if the brake pedal is being pressed.

Valet

Take-Over