Vizio VO37L User Manual

Page 48

VIZIO VO37L HDTV10A User Manual

Version 2/28/2008

www.VIZIO.com

4.4.3

Partial Channel Search

If you believe channels are missed from the auto
search, you can do a partial channel search to look for
channel in a certain channel range again. Press the

button to highlight the Partial Channel Search

selection.

Press the

button to enter the submenu.

Press the

button to select scan mode to look for

Analog, Digital, or both Analog/Digital channels.

Press the

button to highlight the “To” and “From”

selection. Press the

button to select the range of

channel numbers you want to start searching in.
Press to start channel search.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.

4.4.4

Skip Channel

After the TV has stored all of the available DTV channels in memory you will find that some channels will
be too weak to watch comfortably or they may be channels you do not want to see. Select the channel
you wish to remove, press and

buttons to open the TV TUNER SETUP menu and then press the

button to highlight SKIP CHANNEL. Press the

button to select this channel to be skipped when

using the CH+ or CH- button. You will still be able to select this channel using the number buttons on the
remote control.

4.4.5

MTS

This feature allows you, the user to select the different languages in which the signal provider or
broadcaster is transmitting the audio with the program you are watching. This signal is usually or in most
cases Spanish language.

Press the

button as many times as it takes to scroll down to this option and get it highlighted.

Press either

button to go through the settings of this feature to make your selection.

Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.

4.4.6

Time Zone

Setting the correct Time Zone for your area will
ensure that the correct program times are shown
after pressing the GUIDE button on the remote
control.

Press the

button to highlight the Time Zone

selection.

Press the

button to select your area.

Once the adjustments are completed press the
LAST button repeatedly to exit the OSD completely.