Vizio VP503 - Manual (Page 6)

VIZIO ® VP503 HDTV10A User Manual
Version 5/27/2008 6
www.VIZIO.com
Preparing Your PLASMA HDTV for Wall Mounting Preparing Your PLASMA HDTV for Wall Mounting Preparing Your PLASMA HDTV for Wall Mounting Preparing Your PLASMA HDTV for Wall Mounting
To remove the stand base To remove the stand base To remove the stand base To remove the stand base
1. Unplug all of the cables and cords
from your VIZIO VP503 HDTV10A.
2. Place the VP503 HDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Remove the cover on the stand.
4. Remove the six (6) screws holding
the base to the VP503 HDTV10A.
5. Carefully remove the stand base.
Now, the VP503 HDTV10A can fit securely to a
mount (sold separately) by utilizing the mounting
holes in the center of the back panel of the High
Definition TV. Please make sure to read the
instructions of your specific mount to properly
hang the VP503 HDTV10A.
The pitch of the mounting holes is 600mm
horizontally and 200mm vertically.
The screw type required is metric M8, 20mm
long, 1.25mm pitch. The length of the screws
will depend on the thickness plate being attach
to the TV; our brackets come with different
length screws.
To find the perfect mount for the VIZIO VP503 HDTV10A, browse VIZIO’s certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).