Chapter 3 – Vizio VP503 User Manual

Page 29

VIZIO

VP503 HDTV10A User Manual

Version 5/27/2008

www.VIZIO.com

Chapter 3

Setting Up to Watch Television

For ‘Preparing Your PLASMA HDTV for Wall Mounting’, see page 6.

3.1

Basic

Basic PLASMA

PLASMA

PLASMA HDTV Start Up

HDTV Start Up

1. Connecting the Power Cable

Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.

2. Connect Audio and Video Cables to the HDTV

(see pages 14 ~ 28 for detailed steps)

3. Turning Power On

Once all the components are connected, press the Power ON button on the side of the HDTV, or
press the Power ON (Orange) button on the remote control.

4. Initial Setup

After powering on the TV set, the Initial
Setup screen will come up; please press
the

►

button on the remote control.

The Language choice screen will be
displayed; the default English option is
highlighted. If you wish to change the
OSD language to Español or Français,
press the

▼

button on the remote control

to select the language you want.

Press the

►

button on the remote to go to

the next screen.

Note:

At this point,

f a Set-Top Box from your

Local Cable or Satellite Service Company or other
equipment is been used; please press the LAST
key on the remote control and skip to Step 5. If
this is not your case, please continue at Step b.