Vinothèque WhisperKOOL 2500 User Manual
Page 7
Customer Service - 1.800.343.9463
Page 4
The cabinets have leveling legs that can be adjusted up or
down with a wrench (provided with unit) as needed. There
are two primary reasons for leveling the cabinet:
— To assure that the unit stands solidly on the floor
without rocking back and forth
— To adjust the doors and make sure they are flush with
one another, providing a tight seal
These leveling legs are pre-adjusted at our factory, but
they may need to be tweaked to fit your specific install
location. To level the unit, slowly adjust the legs using the
wrench. Work in a clockwise motion to lengthen the leg
or a counter-clockwise motion to shorten it.
Do not try to level the cabinet with a leveling device.
The unit is designed to stand slightly off plumb, tilting
backward acutely so the doors will close firmly. This will
compensate for the weight of the doors.
Once you have completed leveling the cabinet, check the
unit to determine whether or not the doors are flush and
sealing properly.
LEVELING THE CABINET