Velodyne Acoustics SC-602 - Manual (Page 4)

Congr atulations
1
.
w w w . v e l o d y n e . c o m
SC-602 Amplifier User’s Manual
Congratulations on your purchase of a Velodyne SubContractor Series (SC) 602 amplifier
and associated subwoofer. This system represents the state-of-the-art in low frequency
reproduction. Read and follow the instructions below to ensure safe and proper
system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid
electrical shock, do not open the speaker enclosure or the amp chassis cover. Please observe
all warnings on the equipment itself. There are no user serviceable parts inside. Please refer
all service questions to your authorized Velodyne dealer.
P r i o r t o I n s t a l l a t i o n
Please unpack the system carefully. Please save the carton and all packaging materials
for future use. Record the serial number in the space provided on the warranty card and
page 21 of this manual for future reference.
S C - 6 0 2 S U B W O O F E R A M P L I F I E R
• Amplifier: 400 (x2) watts dynamic/200 (x2) watts RMS high efficiency, Class D
• Twin-amplifier configuration easily drives two SC-600 Series subwoofers
• DSP-controlled
• Four selectable presets for customized listening mode
• Automatic 5-band room equalizer (microphone included)
• Night-mode setting
• Mute control
• Line-level (RCA) inputs and outputs
• Speaker-level inputs with five way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0, 90, 180 or 270 degrees)
• Built-in adjustable (30-160 Hz) digital low-pass crossover with 24 dB/octave slope
• Driver Displacement Control software to prevent over excursion and amp clipping
• Blue power indicator LED
• RS-232 Serial Interface
• 12 Volt trigger
• Universal IR repeater mini-jack
• Model-specific subsonic filter
Product Features