VTech NEAX 2400 IPX - Manual (Page 55)

– 51 –
Call Forwarding – All Calls
To set
Press Speaker. Receive dial tone.
If setting for another station, press MULTILINE APPEARANCE.
Press FWD or dial “Call Forwarding – All Calls” access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD LED lights (at your station or at the D term of the multiline station you
are setting).
Press Speaker. Call Forwarding – All Calls is set.
Using the Soft Key
Press FDA Soft Key. Receive special tone.
Dial destination; wait for service set tone.
“ FORWARD SET” is displayed, call forwarding for all calls is set.
To verify (with D term 4D/8D/16D/16LD/32D)
Press FWD.
Display indicates the station number calls are forwarded to.
Note 1: If recipient station is a D term 4D/8D/16D/16LD/32D,
LCD displays:
Note 2: With Soft Key operation, FDB flashes on the display.
Forwarding
station
4:26 PM TUE 13 APR 2004
FORWARD SET 2000
4:26 PM TUE 13 APR 2004
FORWARD SET
MIC >>>
Forwarding
station
4:26 PM TUE 13 APR 2004
FORWARD 2000