Pprro og grraam mm miin ng g o op pttiio on nss – Viper 591XV User Manual

Page 30

Prro

grraam

miin

g O

pttiio

nss

Programming options control your system's normal, operational

set-up. Most options do not require additional parts, but some may

require additional installation labor. This system's programming

options are listed below, with the factory default settings in bold:

■ 1122,, 24, or 60 minute run time. your system can be pro-

grammed to allow the vehicle to run for 12, 24, or 60 min-

utes when remote started. Can be set up to minute incre-

ments by your installer.

■ 3, 6, 9, or 1122 minute timer mode run time. Your system can

be programmed to allow the vehicle to run for 3, 6, 9, or 12

minutes when remote started in timer mode. Can be set up to

16 minutes by your installer.

■ Comfort closure is a programming option which closes the

vehicle’s windows after remote locking.

■ Parking lights ffllaasshhiinngg or constant. Your system can be pro-

grammed to either flash or to turn on the parking lights con-

stantly during the entire remote start operation.

■ Passive Mode or AAccttiivvee M

dee. In Passive Mode the Failsafe

Starter Kill will automatically activate 30 seconds after the

ignition has been turned off.

■ Ignition switch-controlled door-locking oonn or off. With this

feature on, the doors will lock 3 seconds after the ignition

key is turned on, and unlock when the ignition key is turned off.