Venture Products VP100L - Manual (Page 16)

16
USER’S INSTRUCTIONS
) The appliance does not switch on. No sound comes out. What can I do?
We can only provide some clues to help you check the main issues. Please check this list
before contacting us.
9 Check your house mains distribution
9 Check that your mains cable is connected to a wall-outlet (AC alimented)
9 Check that your mains cable is connected to the V100A+ power inlet
9 Check that your equipments voltage are compliant with your domestic one
9 Check that the rear switch is set to ON
9 Check that your amplifiers and other appliances are ON
9 Check that the preamplifier/amplifier are not in stand-by mode
9 Check that the remote control is operating (with right AAA batteries) to have your
appliance waken up from the stand-by mode (if it was)
9 Check that source equipments are ON (CD player…)
9 Check that source equipments are connected to an INPUT plug of your preamplifier.
9 Check that you selected the ACTIVE input
9 Check that your preamplifier and amplifiers are correctly connected (eventually through
active crossovers)
9 Check that your active crossovers (if any) are ON
9 Check that your speakers are connected to the amplifier. This check concerns every
pair if you use multi-wiring. Also check the cables on your speaker and crossover ports.
9 Check that the appliance is not OFF due to the security-system. Unplug all, and switch
it back ON once you have changed the faulty fuse.