VIEWSONIC N4200W - Manual (Page 37)

35 ViewSonic N4200w
Other Information
Specifications
LCD Type 42.02” view able
Color Filter 0.681 mm (H) x 0.227 (V) mm pixel pitch
Glass surface RGB vertical stripe
Anti-Glare
Input signal
RGB RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync,
f
h
:30-80 kHz, f
v
:50-75 Hz
Video D-sub x 1 ,HDMI x 2, YPbPr/YCbCr x 2, S-Video x 2,
CVBS x 2
Audio Mini-stereo (Φ3.5mm x 1 ), RCA (L/R) x 4
Compatibility PC Up to 1360 x 768 Non-interlaced
Resolution 1360 x 768 @ 60 Hz
Speaker Output 10W x 2
Power Voltage 90-240 VAC, 50/60 Hz
Display area Full Scan 930.25mm (H) x 523.01 mm (V)
36.62 inch (H) x 20.59 inch (V)
Operating Temperature 32° F to + 104° F (0° C to + 40° C)
conditions Humidity 85% (no condensation)
Altitude To 10,000 feet (3,000m)
Storage Temperature -4° F to + 122° F (-20° C to + 50° C 240h)
conditions
Humidity 85% (no condensation)
Altitude To 40,000 feet (12,000m)
Dimensions Physical 1243 mm (W) x 739 mm (H) x 304mm (D)
48.93 inch (W) x 29.09 inch (H) x 11.96 inch (D)
Weight Net 33kg (72.68 lb)
Regulations FCC, UL, cUL, NOM
Power saving On <240 W LED Green
modes Passive Off <3 W LED Red
Pre-test Timing Mode (Pre-adjusted to GTF 1360 x 768@60Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in
permanent damage to the LCD display.
Note: Product Specification is subject to change without notice.