Preparing your plasma hdtv for wall mounting – Vizio P50 HDTV20A User Manual
Page 6
VIZIO P50 HDTV20A User Manual
Version 12/6/2007
6
www.VIZIO.com
Preparing Your Plasma HDTV for Wall Mounting
The VIZIO P50 HDTV20A can either be kept on the stand base or mounted on the wall for viewing. If you
choose to mount the P50 HDTV20A on the wall, please follow the instructions below for removing the
stand base.
To remove the stand base
1. Unplug all of the cables and cords from your P50
HDTV20A.
2. Place the P50 HDTV20A face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the six (6) screws on each side of the back
panel of the P50 HDTV20A located near the bottom so
that the stand base can be removed (see Figure A).
4. Gently pull the stand away from the P50 HDTV20A by
grasping firmly on the base.
5. Now, the P50 HDTV20A can firm securely to a mount
(sold separately) by utilizing the mounting holes in the
center of the back panel of the TV (see Figure B).
Please make sure to read the instructions of your
specific mount to properly hang the P50 HDTV20A.
To find the perfect mount for the VIZIO P50 HDTV20A, browse VIZIO’s certified mount selection at
or call directly 888-VIZIOCE (888-849-4623).