Venturer PLV76176 - Manual (Page 6)

E - 5
ACCESSORIES
Please check and identify the supplied accessories.
Remote Control (with batteries) ............................................................................................ x 1
GETTING STARTED
USING ThE REMOTE CONTROL
• Point the remote control at the remote sensor
located on the unit.
• When there is a strong ambient light source, the
performance of the infrared remote sensor may
be degraded, causing unreliable operation.
• The recommended effective distance for remote
operation is about 16 feet (5 meters).
TO INSTALL BATTERIES
1. Open the battery door.
2. Insert 2 “AAA” batteries.
BATTERY REPLACEMENT
When the batteries become weak, the operating
distance of the remote control is greatly reduced
and you will need to replace the batteries.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same
or equivalent type.
NOTES
• If the remote control is not going to be used for a
long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix
ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they
become weak.
• Weak batteries can leak and severely damage
the remote control.
• WARNING : Do not dispose of batteries in a fire.
Batteries may explode or leak.
PLV76176S7_IB_UL_090723.indd 5 7/24/2009 11:52:43