2 controls and functions, 1 plasmaview at a glance, Controls and indicators – Vidikron VP-42HD User Manual
Page 15: Figure 2-1 . plasmaview controls and indicators, Iminar, Controls and functions, Plasmaview at a glance, 1. plasmaview controls and indicators, Pre l iminar y

Vidikron PlasmaView Owner’s Operating Manual
5
PRE
L
IMINAR
Y
2.1
PlasmaView at a Glance
Figure 2-1, Figure 2-2 and Figure 2-3 show the locations of the PlasmaView controls,
indicators and connectors.
Controls and Indicators
Figure 2-1. PlasmaView Controls and Indicators
1.
POWER BUTTON
Turns the monitor’s power on and off.
2.
REMOTE CONTROL SENSOR
Receives the signals from the remote control.
3.
POWER/STANDBY INDICATOR
- Lights red to indicate that the PlasmaView is in standby mode;
- Lights green to indicate normal operation;
- Flashes red to indicate that the internal temperature is too high.
4.
INPUT SELECT/EXIT
Press this button to switch inputs, or exit the current menu if an On-Screen Display (OSD)
menu is visible.
2
Controls and Functions
MENU / ENTER
INPUT SELECT
DOWN
UP
LEFT/-
RIGHT/+
/EXIT
VOLUME
4
5
6
7
1
Located on bottom
of Plasma
Located on bottom
of Plasma
3
2