Vizio VP423 10A - Manual (Page 45)

VIZIO VP423 HDTV10A User Manual
Version 5/16/2008 45
www.VIZIO.com
3.8
DTV / TV Tuner Setup
When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP
menu.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
3.8.1
Tuner Mode
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the button to display
the TV page.
Press the button to highlight the Tuner Mode
selection.
Press the button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD completely.
3.8.2
Auto Search
Press the button to highlight the Auto Search
selection.
Press the button to Auto Search for TV
channels available. The TV will automatically
search for analog and digital channels.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
3.8.3
Partial Channel Search
If you believe channels are missed from the auto
search, you can do a partial channel search to
look for channel in a certain channel range again.
Press the
button to highlight the Partial
Channel Search selection.
Press the button to enter the submenu.
Press the button to select scan mode to look
for Analog, Digital, or both Analog/Digital channels.
Press the button to highlight the “To” and
“From” selection. Press the button to select the
range of channel numbers you want to start searching in.
Press MENU to start channel search.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.