VIEWSONIC VS13329 - Manual (Page 19)

ViewSonic VNB108 13
Chapter 2 BIOS Setup Utility
2.1 When to Use BIOS Setup?
You may need to run the BIOS Setup when:
An error message appears on the screen during the system boot and you are
requested to run SETUP.
You want to change the default settings for customized features.
You want to reload the default BIOS settings.
2.2 How to Run BIOS Setup?
To run the BIOS Setup Utility, turn on your ViewBook and press the key during
the POST procedure.
If the message disappears before you respond and you still wish to enter Setup,
either restart the system by turning it OFF and ON, or try to restart by simultaneously
pressing ++ keys.
Note: Be noted that the screen snaps and setting options in this chapter are for your
references only. The actual setting screens and options on your ViewBook may be
different because of BIOS updates.
2.3 Control Keys
Press F1 to call a small help window that describes the appropriate keys to use and the
possible selections for a highlighted item.
Please check the following table for the function description of each control key.
Control Key(s) Function Description
↑/↓ Moves cursor left or right to select Screens
→/← Moves cursor up or down to select items
+/ - Changes an option for the selected items
Brings up the selected screen
When in the Main Menu - Quits and not saves the changes your
have made into CMOS
When in the Status Page Setup Menu or the Option Page Setup
Menu – Exits the current page and returns to the Main Menu
Call the general help
Invokes the previous values
Loads optimized default values
Save & Exit Setup