Vinotemp VT-12TEDi - Manual (Page 12)

OPERATING YOUR WINE CELLAR
It is recommended that you install the wine cellar in a place where the
ambient temperature is between 50°F and 80°F. If the ambient temperature
is above or below recommended temperature, the performance of the unit
may be affected. For example, placing in extreme cold or hot conditions may
cause interior temperature to fluctuate. Internal range of 50-66°F may not
be reached. The temperature may fluctuate depending on whether or not the
interior light is on or off or whether the bottles are located on the upper,
middle or lower section.
How to use the buttons on the Display Panel:
You can set the temperature as your desire by pressing the control panel
buttons. There are two buttons on the panel “ ” and “ ” to adjust the
temperature by 1°F between 50-66 °F. You can turn the interior light on or
off by pressing the “ ” button.
CARE AND MAINTENANCE
Cleaning your wine cellar
• Unplug the wine cellar and remove the bottles and shelves.
• Wash the inside with warm water or a baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
• The outside of the wine cellar should be cleaned with mild detergent and
warm water.
MAINTENANCE OF YOUR WINE CELLAR
Moving your wine cellar
• Remove all the bottles and shelves.
• Securely tape down all loose items inside your wine cellar.
• Turn the leveling legs up to the base to avoid damage.
• Tape the door shut.
• Be sure the wine cellar stays in the upright position during
transportation.
12
W W W . V I N O T E M P . C O M