Vivitar VIVICAM 3200 - Manual (Page 14)

V3200 Camera User’s Guide
10
TIP For best image quality, use the self-timer only after securely mounting the camera on a
tripod or other solid surface.
Using the Self-Timer
Use the self-timer to delay taking a picture for 10 seconds after
pressing the shutter button.
To take a picture using the self-timer:
1 Turn the camera on.
2 Set the Mode switch to Capture.
3 Press the Self-timer button. The self-timer symbol in the Status
LCD will flash to indicate that the timer is on stand-by.
4 Frame your subject, then press the Shutter button to activate the timer. The red Self-timer light on the
front of the camera will shine steadily for 7 seconds, then flash for 3 seconds before the camera takes
the picture. The camera beeps when the image capture is complete.
To turn off the self-timer:
Press the Self-timer button again.
è The self-timer automatically turns off once the picture is taken or the camera is turned off.
Number of
images
remaining