VTech IP 5850 User Manual

Page 23

Audible Indicators

This system gives you voice prompts for feature
operations and voice confirmations when you press
a button or complete an operation.

Turn Answering System On or Off

Press ON/OFF to turn the system on or off.
When the system is turned on, you will hear "Answering machine on" and the
ON/OFF light will be lit.
When the system is off, you will hear "Answering machine off" and the ON/OFF
light will not be lit. The system will still answer after 10 rings if it is off, then announce
"Please enter your security code" and wait for you to enter your two-digit code to
access remote functions. (See Remote Access on page 31 for details.)

Set the Clock

This system comes preset to Monday, 12:00 AM, If CL flashes in the message
window, you will need to set the correct day and time at the Base.

1. Press TIME/SET. The time and day will be announced, followed by "To set day

and time, press TIME/SET." Press TIME/SET again. The day will be announced.

2. Press CHANGE until the system announces the correct day, then press TIME/

SET. The system announces the current hour
setting.

3. Press CHANGE until the system announces

the correct hour, press TIME/SET. The system
announces the current minute setting.

4. Press CHANGE to advance the minutes one

at a time.

- OR -

Press and hold CHANGE to advance the minutes
in increments of 10.
When the system announces the correct minute,
press TIME/SET. The system announces the current clock setting.

NOTE: Press any PLAY/STOP button to exit programming at any time. The PLAY/
STOP buttons are located on the Base Unit and are labled numbers 1, 2, and 3.
These buttons also playback messages left in their respective mailbox.

Answering System Operation