Vivitar VIVICAM 5015 User Manual
Page 10
9
2.
Press the Shutter button and wait a moment for the photo to be is taken.
Note: When the internal memory is full, the LCD screen will display
“Memory Full! Insert a SD Memory Card
to Transfer and Take More Photos!
” If you attempt to take photos or videos when the camera’s internal
memory is full, the camera will beep continuously. Please download the test images to your computer using the
Vivitar Experience Image Manager software as described below in the section “Transfer photos and videos
to your computer
” as soon as possible or insert an SD memory card in order to take more images!
Flash
Your camera has a built in flash function which enables you to take photos when the light condition is not good.
1.
Press the Up button.
2.
The icon
will appear on the LCD indicating that the auto flash is turned on.
3.
Press the Up button again.
4.
The icon
will appear on the LCD indicating that the red eye reduction function has been
activated.
5.
Press the Up button once more until you see the icon
appear on the LCD screen. This indicates
that the flash is forced on.
6.
To turn off the flash function, press the Up button again until the icon
is displayed on the LCD.