Vision Fitness R2100 - Manual (Page 6)

6
3
STEP
3
STEP
• Unfold the console mast and slide
the mast into the console mast
mounting bracket. Secure the console
mast with the five screws (M8 x 15L)
and lock washers and tighten with the
5
MM L-Shaped wrench. Note: The
screw facing the seat does not use a
lock washer. Tighten only until snug.
Slide the console mast cover down
over the screw heads.
• Attach the front handle bar to the
console mast with two screws
(M8 x 20 L). Tighten with the 5
MM Allen
wrench.
• Use the 4 MM L-shaped wrench and
cap screws (M5 x 22L) to secure the
water bottle bracket to the console
mast. Use two screws (M5 x 15L) to
secure the water bottle cage onto the
water bottle bracket. Place the water
bottle in the cage.
• Remove the screws (M5 x 12L) from
the back of the console. Plug the con-
nection wire into the proper position
in the back of the console. Mount the
console to the console mast with the
four screws.
PINK BAG