VIORE PLC10V49 - Manual (Page 22)

19
Media Operation
System Settings for Media
System operation will define the setting of the set; these definitions will be stored until you change them
again.
General Steps of Setup Menu
1. Press SETUP on the remote control. The main menu will be shown as below.
2. Press the / buttons to select the Icon of the desired section, e.g. “TV System" and press button
to open that section.
3. Press / to select the desired feature and again press button to open that section.
4. Press / to select the desired feature and then press "ENTER " to select the new setting.
5 To exit the menu, press "SETUP" or to select EXIT SETUP and then press " ENTER "
When launching the setup routine, the pressing of the following buttons will turn off the setup menu,
while the choices that have been changed will be saved.
Menu specification
1. SYSTEM SETUP
The system setup options are illustrated below:
TV SYSTEM
According to the Color system of your TV, select proper TV TYPE.
SOURCE
Select the source of the information you want to play: AUTO, CARD, USB
TV TYPE
Format 4:3 PS, 4:3 LB, 16:9