Vision Fitness R2650HRT - Manual (Page 6)

6
3
STEP
• Mount the upper handlebars to the
console mast using two lock washers
(M8) and two screws (M8x15L).
Tighten with the 5mm T-Shaped
wrench.
• Remove the four mounting screws from
the back of the console. Connect the
wire harness and heart rate wires that
come from the console mast into the
plugs located in the back of the console.
Make sure the 9-Volt battery is plugged
into the console. Attach the console to
the mast with the four screws removed
earlier.
PINK BAG
1 2 3
3
STEP
Console Mast
Handlebar