Velodyne Acoustics SC-1250. - Manual (Page 9)

SC-IF/SC-IC (In-Floor/In-Ceiling):
- 12” (9.7” piston diameter) subwoofer
- 3” high temperature inside/outside voice coil
- Oversized spider for linearity at high excursion
- High-excursion EPDM rubber surround
- 162 ounce magnet/346 ounce motor structure
- Magnetically shielded for video use
- Frequency Response: 22 - 120Hz (+/- 3 dB)
- 8 ohm impedance
Your new Velodyne amplifier provides for a number of installation options. Read all the
installation information below in order to determine which installation option is best for your
system. Remember to perform all installation procedures with system power turned off.
F R O N T P A N E L C O N T R O L S A N D D I S P L AY S
Figure 1: Front Panel Connections of the SC-1250.
Following are brief descriptions of the controls described in Figure 1. More detail on these
controls can be found in the next section.
(1) Power Switch
This push button style switch is the main on/off for the unit.
(2) Power LED
This LED illuminates when the power is on. Blue is normal operation. It turns amber when
the unit is in standby mode or the remote has been used to deactivate the unit. This LED
dims when the unit is in night mode.
(3) Mic Input
Connect the supplied microphone for the Auto-EQ feature to this mini-jack.
(4) Remote Eye
This is the eye that receives infrared commands from the supplied remote.
Ins tallation
3
.
w w w . v e l o d y n e . c o m
SubContractor User’s Manual