Velodyne Acoustics SC-1250. - Manual (Page 20)

14
.
w w w . v e l o d y n e . c o m
SubContractor User’s Manual
Each preset has its own characteristics with respect to subsonic filter, volume differential and
a single equalizer (EQ) in order to optimize the listening mode for the preset.
The following table shows the settings for the various presets:
Preset Subsonic Filter EQ EQ Volume
Frequency Frequency Level Differential
Movies 24 Hz 37 Hz +4 dB +8 dB
R&B – Rock 27 Hz 52 Hz +3 dB +5 dB
Jazz – Classical 24 Hz N/A N/A N/A
(Reference)
Games
34 Hz 62 +4 dB +4 dB
There is a feature that allows you to restore default settings for your SC-1250. By pressing
presets in EXACTLY the following order on the remote, the unit’s power light will blink indicating
that you have restored defaults.
Preset 1: Movies
Preset 2: R&B – Rock
Preset 3: Jazz – Classical
Preset 4: Games
Preset 4: Games
Preset 3: Jazz – Classical
Preset 2: R&B – Rock
Preset 1: Movies
When you press the presets in the above order, the numeric LED will display “P3” indicating that
you have restored defaults. The unit’s volume is reset to level 30 out of 80.
Do not use any harsh detergents or chemicals to clean the SC-1250 chassis or the subwoofer
cabinet. Abrasives, detergents, or cleaning solutions will damage the finish on the SC-1250
chassis or the subwoofer cabinet. We recommend using a damp cloth to clean the front, back
and sides.
During normal conditions, the amplifier may be left on continuously without any problems. If you
plan to leave the unit unused for an extended period of time, we recommend that you turn off
the unit by the master power switch on the front panel.
R es toring Defaults
Care of your Amplifier and Subwoofer