Vivitar ViviCam X327 - Manual (Page 25)

4. Press the MENU button to confirm, save the changes and exit.
Auto Power Off
By default, if your camera is idle for 60 seconds it will automatically be powered off. Use the
Auto Power Off option to change this setting:
1. Press the Up/Down button to select the Auto Power Off option in Setup menu.
2. Press the MENU button.
3. Press the Up/Down buttons to select an Auto Power Off option from the Menu that
appears:
4. Press the Up/Down button to select a time that the camera will automatically power off if
inactive.
Note: If you select None, the camera will not be powered off until the battery power is
depleted or the camera is turned off manually.
5. Press the MENU button to confirm, save and exit to the camera standby mode.
Frequency
Select the light frequency for the local environment. Generally, 60HZ is for the U.S. and 50HZ
for Europe and Japan. The default setting is 60HZ
24