VIEWSONIC VPAD10 VS13790 User Manual

Page 38

ViewSonic

VPAD10

General hardware problems / possible causes and solutions

Some common hardware problems and recommended solutions are in the below:

1. System Ceased Operation during the Execution of the Program.
Cause: error by using the current procedure. Solution: Click , and keys. Windows operating system causes error;
restart the system by using the power supply.

2. Operating System cannot be Restored to the Using State.
If the operating system can not resume operation after a pause, please check the following possible causes: The battery may have
a malfunction, or the current power level may be very low. To solve this problem, please connect an external power supply such as
the AC adapter.

3. The System cannot Shutdown Normally.
Hold down the power button 4-6 seconds, until the system shuts down.

4. After Shutdown, if the System cannot reboot:
Connect the AC power adapter immediately; as it means that the battery did not have sucient power to reboot.

5. Measures to Extend Battery Life?
Adjust the screen brightness to the minimum possible level.
Adjust the computer screen to the normal standard.
Remove the VPAD10 card if not often used.
Turn o the VPAD10 Bluetooth function.
Turn o the VPAD10 wireless network function.
Ensure that the power conguration setting is in the "Save power" mode.