VTech i 5881 - Manual (Page 42)

42
Answering System Operation
REMOTE ACCESS COMMANDS
FUNCTION: COMMAND:
Play messages Press # , then enter the appropriate mailbox
in a mailbox number(1 , 2 , or 3 ). The system plays
new messages. If there are no new messages,
the system plays old messages.
Repeat a message Press #4 while message is playing; each
press backs up another message.
Skip a message Press #6 while message is playing; each
press advances another message.
Stop Press #5 .
Save messages Hang up.
Delete message Press #9 while message is playing.
Review announcement Press #7 ; system plays announcement,
then beeps.
Record announcement Press *7 ; after beep, record announcement,
press #5 to stop.System plays back
announcement.
Record memo Press *8 ; then mailbox number where
you want memo recorded; speak after
beep; press #5 to exit.
End remote access call Press *0 .
Turn system off P r e s s # 0 ; t h e s y s t e m a n n o u n c e s ,
“Answering machine off.” Press #0 again
to turn the system back on.
Turn system on When system is off, it answers after 10
rings and announces,“Please enter your
security code.” Enter your remote access
code.
Answering System Operation
• NOTE: If no key is pressed within 10 seconds of entering remote access code,
the voice menu will be announced. After the voice menu announcement, if no key
is pressed within 20 seconds, the remote access call will automatically end.