VIEWSONIC ViewPad 7e VS14359 - Manual (Page 17)

5 4
1.6 Turning Device On or Off
Turn device on or off
After installing the memory card and charging the battery, the device is ready to be turned
on.
Turn on your device
Press and hold the Power button on the left top of your device until the device display
turns on.
Turn off your device
1. Press and hold the Power button until a pop-up window appears.
2. Tap Power off, and then select OK to confirm.
To set your device to Sleep mode
To set the device to sleep mode, press the Power button . This will turn the display off.
To turn the display on, press the Power button again.
Set device to Silent mode
1. Press and hold the Power button until a pop-up window appears.
2. Tap Silent mode.
Or, on a locked screen, slide to the left.
To undo silent mode, slide to the left.
NOTE
To press Power button and Home button at the same time for 3 seconds will
reset the device.
1.7 Unlocking the Screen
Lock the screen to prevent it from accidentally being touched. By default, the screen locks
after being idle for a period of time. You can set the length of screen timeout until the
screen locks.
To Unlock the screen
1. Press the Power button to turn on the display from sleep mode.
2. Drag the icon to the right to unlock the screen.