VIEWSONIC ViewPad 7e VS14359 - Manual (Page 16)

4
1.4 Charging Battery
When you first tale your ViewPad out of the box, the battery is only partially charged. To
fully charge the battery, charge it for 2 hours.
Charge the battery
1. Connect one end of the AC adaptor to the DC jack on top of the device.
2. Plug the other end of the AC adaptor to the wall outlet to start charging.
When the battery is charging and the device is turned on, the icon is displayed on
the status bar. When the battery is fully charged, the icon is displayed on the status
bar.
USB Charging
1. Power on your computer.
2. Plug the small end of the USB cable into the device’s mini-USB port.
3. Plug the other end to your computer to start charging.
Your device has a charging indicator next to the front camera. While the device is turned
on, the indicator light is red when charging and green when charging is complete.
NOTE
 To prevent damage to your device, only use the supplied AC adapter.
 USB connected information will appear when you connect your device with computer.
1.5 Using Headsets
For listening to music, plug a headset to the headset jack.
NOTE
• When using a headset, your ability to hear outside sounds may be limited. Do not use
headset if it will endanger you.
• When using a headset, do not set the volume to its maximum as it may damage your
hearing.