VTech CS2112 - Manual (Page 41)

www.vtechphones.com 37
Appendix
Troubleshooting
Problem Suggestion
The telephone does not
rng when there s an
ncomng call.
Make sure the rnger s on (page 8).
Make sure the telephone lne cord and power adapter are plugged n properly (page 2).
The handset may be too far from the telephone base. Move t closer to the telephone base.
There may be too many extenson telephones on the telephone lne to allow all of them to rng
smultaneously. Try unpluggng some of them.
If the other telephones n your home are havng the same problem, the problem s n the wrng or local
servce. Contact the local telephone company (charges may apply).
Other electronc products can cause nterference to your cordless telephone. Try nstallng your telephone
as far away as possble from the followng electronc devces: wreless routers, rados, rado towers, pager
towers, cellular telephones, dgtal telephones, ntercoms, room montors, televsons, VCRs, personal
computers, ktchen applances, and other cordless telephones.
Test a workng telephone at the telephone jack. If another telephone has the same problem, the problem
s n the telephone jack. Contact your local telephone company (charges may apply).
The telephone lne cord mght be malfunctonng. Try nstallng a new telephone lne cord.
Remove and re-nsert the battery and place the handset n the telephone base.
Wat for the handset to synchronze wth the telephone base. Allow up to one mnute for ths to take
place.
•
•
•
•
•
•
•
•
•
•