Power supply, Using the car power adapter – Venturer PVS7980 User Manual
Page 8
E - 8
Using the Car Power Adapter
The included 12V car power adapter is designed for use with vehicles that have a 12V, negative
ground electrical system.
Using the Main Unit and the Monitor Together
Using the Main Unit or the Monitor
POWER SUPPLy
WARNING:
Disconnect this car power adapter when
not in use. Not for use in 24V vehicles.
Cautions:
• Use this unit only with the included 12V car power adapter. Use with other car adapters could damage
the unit, or even your vehicle.
• the included 12V car power adapter is for use with this unit only. Do not use it with any other
equipment.
• In the interest of traffic safety, drivers should not operate the unit or view videos while driving.
• When the inside of the 12V car socket is dirty with ashes or dust, the power section may become hot
due to poor contact. Be sure to clean the 12V car socket before use.
• after use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.
• If the unit is not properly attached to a vehicle, it may become airborne in the event of an accident and
cause damage, injury, or death.
• Check your local traffic laws for rules governing the use of video devices in vehicles.
IMPORTANT
This car adapter is for use with 12 volt
batteries only.
CAUTION
F o r c o n t i n u e d
protection against
risk of fire, replace
only with same type
and rating of fuse.
811-798191W012.indd 8
4/1/2008 5:00:58 PM