Viper 5000 - Manual (Page 35)

36 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
Adjusting the Shock Sensor Setting
1. Increase Sensitivity—Press and release the button to
increase shock sensor sensitivity by one step. The LCD
transmitter beeps 2-times for each step increased in adjust-
ment (and/or 1 vibrate if programmed). When the shock
sensor adjustment reaches maximum sensitivity when the
indicator bar is filled completely to the right
. There are 21 levels of shock sensor
adjustment, during sensor adjustment these levels are
displayed on the indicator bar as listed below.
n noottee:: When the arm and disarm are programmed to a sin-
gle button, then the AUX button is used to increase the
sensitivity setting of the sensor.
n noottee:: When adjusting the shock sensor, ensure that the
vehicle’s doors are closed.
➜