Visioneer 9450 - Manual (Page 42)

38 V ISIONEER 9450 S CANNER I NSTALLATION G UIDE
C
ARE AND
M
AINTENANCE
Your scanner is designed to be maintenance-free. Occasional cleaning,
however, can help ensure continual optimal performance.
C LEANING THE S CANNER G LASS
Scanning items that have excessive amounts of dirt or dust may dirty
the glass. To ensure the best quality scanned item, wipe the scanner glass
with a soft clean cloth to rid the glass of dust or other debris.
C
LEANING THE
A
UTOMATIC
D
OCUMENT
F
EEDER
You may need to clean the ADF feed mechanism if your scanned
documents do not feed easily into the ADF, or several feed in at the
same time.
To clean the ADF:
1. Wet a cotton swab with some isopropyl alcohol (95%).
2. Open the ADF cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean its
entire surface.
4. Wipe the pad from top to bottom. Be careful not to snag the swab
on the springs on either side of the pad.
5. Close the cover when you’re finished.