Verbatim External Hard Drive NAS - Manual (Page 21)

21
The next screen allows you to assign any of the current users 13.
to your new group. When done with this form, press Next to
continue.
The next screen allows you to assign share access privileges for 14.
the new group. Each of the existing shares may be setup for no
access, read-only access, or full read/write access. When done
with this form, press Complete.
Add New Shared Folder
The fi nal procedure for Quick Setup allows you to optionally 15.
setup a new share. If you do not want to set up a share at this
time, you may exit the administrator as described in Step 18.
Begin share setup by selecting the Quick Setup / Add Share
button.
Fill in the initial screen with a name for your new share. The
share name must be lower-case and may be a maximum of 20
alphanumeric characters, without spaces. The share name must
begin with an alphabetic character. After entering the name,
the path for the new share will automatically be displayed. A
description of this share may optionally be entered in the fi eld
provided. When done with this form, press Next to continue.
The next two screens allow you to assign access privileges for the 16.