Verbatim External Hard Drive NAS - Manual (Page 20)

20
The next screen allows you to assign this user to an existing 10.
group. As described above, the initial factory setting provides for
the default group named “@guest-share”. When done with this
form, press Next to continue.
The fi nal screen for adding a user allows you to assign access 11.
privileges to currently defi ned shares. Of course, if you checked
“Create Private Folder” in step (9), then read/write access has
automatically been provided to this user’s private folder.
Though the initial factory setting provides for three default shares
(admin, guest-share, and public), only “public” is available for
selection for access to new user accounts.
When done with this form, press Complete.
Add New Group
Next you may optionally setup a new group. If you do not want to 12.
set up a group at this time, you may jump ahead to Step 15.
Begin group setup by selecting the Quick Setup / Add Group
button.
Fill in the initial screen with your group’s name. The group name
must be lower-case and may be a maximum of 20 alphanumeric
characters, without spaces. The group name must begin with an
alphabetic character. Press Next to continue.