VIEWSONIC M50 - Manual (Page 6)

ENGLISH
5 ViewSonic M50
Congratulations on your purchase of a Graphics Series ViewSonic M50
monitor!
Save the original box and all packing material for future shipping needs.
NOTE: This product was designed for operation in the magnetic fields of the
hemisphere where it was purchased. Also, the word "Windows
® " in this user
guide refers to the following Microsoft ® operating systems: Windows '95,
Windows '98, Windows NT ® (5.0).
Package Contents
Your ViewSonic M50 package includes the following:
• ViewSonic M50 monitor
• Attached video cable with 15 pin high density mini D-sub connector
• Power cord
• User’s Guide
• INF and ICM installation files on CD-ROM or diskette
Getting Started
• For best viewing conditions sit at
least 18" from the monitor.
• AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS. Oils from
the skin are difficult to remove.
• NEVER REMOVE THE REAR
COVER. The monitor contains high-
voltage parts. You may suffer serious
injury if you touch these parts.
• Avoid exposing the monitor to direct
sunlight or another heat source. The
monitor should be facing away from
direct sunlight to reduce glare.
• Always handle your monitor with
care when moving it.
Precautions
• Choose a well ventilated area to
position your monitor. Do not place
anything on the monitor that prevents
adequate dissipation of heat.
• Ensure the area around the monitor is
clean and free of moisture.
• Keep the monitor away from magnets,
motors, transformers, speakers, and
televisions.
• Do not place heavy objects on the
monitor, video cable, or power cord.
• If smoke, abnormal noise, or strange
odor is present, immediately switch the
monitor off and call your dealer or
ViewSonic. It is dangerous to continue
using the monitor.
Getting Started
IMPORTANT: The supplied INF file assures compatibility with Windows operating
systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors.
ViewSonic
® recommends that you install both files.
• For CD-ROM: Insert the CD-ROM into your system, wait for it to auto-install, select
“Monitor Drivers,” and follow the on-screen instructions.
• For diskette: Insert the diskette into your system, run install.exe, and follow the on-
screen instructions.