Vita Spa L100 - Manual (Page 16)

PostScript Picture
DM Logo5-cmykTXT-LC10.eps
PAGE 12
INS TA L L ING THE SPA CO V ER
1. Position the cover squarely over the spa.
2. Position the locks for the tie-downs on the sides of the spa. You should allow
approximately 1/2” to 3/4” slack in the straps for ease of insertion into the locks and
to allow for material shrinkage during temperature changes.
3. Using the screws provided, attach the locks and insert the cover tie-down straps.
Utilizing the cover anytime the spa is not in use will reduce heat loss and thereby
reduce the amount of running time required to make up that loss by the heating
system.
Keep cover fastened down at all times when not in use.
DANGER - RISK OF INJURY
To reduce the risk of potential injury:
1. Never leave a spa uncovered or unattended.
2. Never leave a spa cover unlocked.
3. Do not stand, sit, or lie on the cover.
ALWAYS REMOVE SNOW FROM THE COVER. THE COVER HAS NOT BEEN
DESIGNED TO SUSPEND THE WEIGHT OF WET SNOW.
C O V ER INSTA L LAT ION
Ke y
C o v e r
Tie Down
S t ra p
Lo c k
S c r ews (2)