Mnp 10 commands (continued), Initialization strings, Caller id commands – Viking InterWorks 56K User Manual

Page 29

VIKING COMPONENTS 56K USB MODEM USER’S GUIDE

MNP 10 Commands (Continued)

Command

Function

@M0

Select initial transmit level of -26 dBm.

@M1

Select initial transmit level of -30 dBm.

@M2

Select initial transmit level of -10 dBm.

@M3 - @M10

Select initial transmit level of -10 dBm.

@M11

Select initial transmit level of -11 dBm.

@M12

Select initial transmit level of -12 dBm.

@M30

Select initial transmit level of -30 dBm.

:E0

Disable the compromise equalizer.

:E1

Enable the compromise equalizer.

Initialization Strings

Command

Function

+MS=12,1

V.90 preferred (K56flex will still work).

+MS=12,1,34667,56000

V.90 only (K56flex and V.34 disabled).

+MS=56,1

K56flex preferred (V.90 will still work).

+MS=56,1,34000,56000

K56flex only (V.90 and V.34 disabled).

+MS=11,1

Disable V.90 and K56flex, use V.34 (28.8/33.6).

Caller ID Commands

Command

Function

#CID=0

Disable Caller ID.

#CID=1

Enable Caller ID with formatted presentation.

#CID=2

Enable Caller ID with unformatted presentation.

Chapter 6