Victor Technology 1260-3 User Manual
Page 29
28
31. SETTING THE TIME
Set Slide Switches as Example Below:
EXAMPLE: Set TIME to 4:37 PM
Decimal Rounding Σ GT Print
2 5/4 . . PRINT
1. Depress
the
CE/C
key. Your display with show 0. and the tape will read 0.C.
2. Depress
the
TIME/DATE
key and hold until the display is flashing.
3. Tap
the
TIME/DATE
key to go to Time Mode.
4. Enter the hour, in our example 16 in military time. Your display will show 16.
5. Enter the minutes, in our example 37. Your display will show 1637.
6. Tap
the
TIME/DATE
key to set the TIME. Your display will now show P 04-37-00 and the
seconds will begin counting.
7. To PRINT the TIME, depress the (#/S) key, your tape will show #
•04•37.
NOTE:
On the PRINT on the paper tape, the dot in front (#
•07•05) means PM, there will
be no dot printed for AM.
Step #
Enter
Depress This Key
Your Display Will Show
Tape Will Read
1.
Clear Key (CE/C)
0. 0.C
2.
TIME/DATE
Key and hold
until display flashes
Flashing Numbers in This Format -
MM-DD-YYYY
3.
Tap TIME/DATE key to
switch to Time Mode
Flashing Numbers in This
Format – HH-MM-SS
4.
16
16
5.
37
1637
6.
Tap TIME/DATE Key
P 04-37-00
7.
#/S
Key
P 04-37-00
#
•04 •37