Bios setup utility – VIEWSONIC VPC100 User Manual

Page 32

ViewSonic VPC100

BIOS Setup Utility

ACPI Configuration

The ACPI Configuration sub-menu allows you to configure the Advanced

Configuration and Power Interface (ACPI) settings. The General ACPI

Configuration is under this sub-menu.

Press [Enter] to launch the General ACPI Configuration screen. Press [Enter]

again to view the ACPI state.

In the above screen, the current setting is displayed. Press [Enter] to change the

ACPI state to use when the system goes to suspend mode.
Available options are:

•

S1 (POS): Power On Standby. All processor caches are flushed and the

CPU stops executing instructions. The CPU and RAM power are maintained,

however, other devices may be powered down.

•

S3 (STR): Commonly referred to as Standby or Sleep. RAM is still powered.