Vivitar VIVICAM T030 - Manual (Page 49)

48
3) Press the UP or DOWN direction control buttons to highlight the menu options. While scrolling
down the selected option will be highlighted.
4) If you would li
ke to proceed with the format, select “Yes” and press the SET button.
5) You will be asked to confirm your wish to format your memory card.
6) Select “No” to exit without formatting.
7)
Select “Yes” and press the SET button to begin the format. The top Multi-Function Key 1
is inactive for this menu.
8) The memory card will be completely formatted.
9) A message will appear confirming that your memory card has been formatted clean.
Firmware Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
3) The “Default Setting” is selected.
4) Press the SET button to reset the camera to the factory default settings.
5) You will be asked to confirm your wish to restore all of the factory settings.
6) Press the UP or DOWN buttons to select “Yes” and press the SET button to begin the format.
The top Multi-Function Key 1 is inactive for this menu.
7) The camera will be reset.
8) A message will appear indicating that the settings have been reset successfully.