VIEWSONIC NX1940w User Manual

Page 21

Country: Select the relevant country using the buttons.

4. Timers

(1).Sleep Timer: preset a time so that the set can get into standby mode after that

time . And the alert function will count down when there is one minute left.

(2). Reminder timer: set an alert time so that when the time finished, there will be a

warning to remind the user.

5. TT Language. and Teletext E/W：The user can set the teletext language.
6. Reset: It is used to reset the OSD settings.
When the input source is in AV, S-Video or SCART mode, you can select Source OSD,
Language, Timers, TT language, Teletext E/W and Reset to default;
When the input source is in PC and HDMI mode, you can select Source OSD, Language,
Timers and Reset to default;

TV setup
The following menu appears only in the TV mode.
A. channel select function
This set can give the user a channel list that all channel received

B. channel setup function

ViewSonic

19 NX1940w/NX2240w

This manual is related to the following products:

NX2240w