Vizio SV420XVT1A - Manual (Page 43)

VIZIO SV420XVT1A User Manual
Version 6/2/2008 43
www.VIZIO.com
Advanced Adaptive Luma
Press the ▼ button to highlight Advanced Adaptive Luma. Large areas of darkness in a picture will result
in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature
will raise the APL to counteract this effect.
Press the
◄ or ► button to choose from the Off, Low, Medium, Strong or Extend setting.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Enhanced Contrast Ratio (DCR)
Press the ▼ button to highlight Enhanced Contrast Ratio. This feature can be
set to On or OFF to allow the TV set to adjust its backlight to display dark and
bright scenes with a more vivid or intense quality.
Press the
◄ or ► button to turn this feature On or Off. Note: Backlight setting
would be disabled if this option is set to On.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Color Temperature
Press the ▼ button to highlight the option for Color Temperature selection.
The default is COOL; this is the 9300K setting.
Press the
◄ or ► button if you want to choose the Normal, Warm or Custom
option.
If you select any option, then a new menu will be displayed showing the
primary colors; Red, Green and Blue.
Press the ▼ button to highlight the color you wish to adjust.
Press the ◄ or ► button to start adjusting the color.
Use the ◄ or ► button to adjust the color.
Press the MENU button when finished. Repeat the procedure to adjust the
other colors if desired.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.