Venturer KTS230 - Manual (Page 22)

- 21 -
Programmable memory
The two types of programmed playback provided by this Unit are title programmed playback and chapter programmed
playback.
Title / Chapter programmed playback
1. Press the MEMORY button while the disc is stopped.
2. Enter the title numbers in - - . Use or button to move the highlight to chapter and enter the chapter numbers
in - - .
3. Use , , or button to move to the other field.
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed playback.
Notes :
• If you press the STOP button, the programmed selections will be cleared.
• If you press the CLEAR button while you are entering a title or chapter, the currently entered numbers will be
erased and you can reset the numbers again.
3. Use , , or button to other field.
4. Repeat steps 2 to 3.
5. Press the PLAY button to start the programmed playback.
Notes :
• If you press the CLEAR button while you are entering a track, the currently entered numbers are erased and you
can reset the numbers again.
• When the unit is playing at program memory mode, the “MEMORY” will display on the display of unit.
Attention :
• Programmable Memory cannot be used on CDG disc.
Track
CD / DVD programmable memory
Advanced
playback
Title Chapter
Programmable memory
Track programmed playback
1. Press the MEMORY button while the disc is stopped.
2. Enter the track numbers in - - - .
DVD CD
DVD