Venturer KTS230 - Manual (Page 15)

- 14 -
(continued on next page)
Playing a Disc
This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are
produced in a manner that allows specific or limited operation during playback. As such, the
DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer
to the instruction notes of discs.
“ ” may appear on the TV screen during operation. A “ ” means that the desired
operation is not permitted by the DVD Unit or the disc.
Basic playback
Playing a Disc
1. Press the STANDBY /ON button on the front panel or press the STANDBY /ON button on the remote control
to turn on the Unit while the Unit is in standby mode, press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.
2. Press the OPEN button on the top. The disc lid opens..
3. Place the disc on the disc tray with the label side up.
4. Press the disc tray's lid to close.
5. The Unit will take a short while to load the disc and automatically begin playback.
Note:
• Let the disc tray open completely before removing the disc. Press the disc tray's lid to close the disc tray after you
remove the disc.
• When playing a disc other then CDG with a video image (CD-V, CD-I etc.), the video image will not shoen on the
TV set.
Pausing playback (still mode)
Press the II PAUSE button on the remote control. To resume normal playback, press the PLAY Y button.
Stopping playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the Unit’s memory will be cleared and pressing the PLAY
Y button will reset
the disc to the beginning.
To skip to a different track
• Press the SKIP/SEARCH button on the front panel / PREV button on the remote once to skip to the start of
the previous track.
• Press the SKIP/SEARCH button on the front panel / NEXT button on the remote to skip to the next track.
• For audio CD/CDG disc, use the number buttons (remote control only) to jump straight to that track number.
To search through the track
• Press and hold the SKIP/SEARCH button on the front panel / SEARCH button on the remote control
to search through the current track.
• Playback resumes from the selected point.
DVD CD CDG