Viking W10345054 - Manual (Page 7)

13
Display Brightness
The Display Brightness preference adjusts the backlight level of
the control panel.
1. On the main menu, press the touch pad next to “USER SETTINGS”.
2. In each of the following screens, continue to press the touch pad
next to “MORE SETTINGS” until “DISPLAY BRIGHTNESS” appears
on the display.
3. Press the touch pad next to “LIGHTER” or “DARKER” to adjust the
setting between 1 (darkest) and 5 (lightest). Press the touch pad
next to “DONE” to lock in the desired setting and return to the
main menu.
Adjust Light Sensor
The Adjust Light Sensor preference allows you to adjust the level at
which the Light Sensor will detect darkness and activate the Auto On
mode for the dispenser light.
1. On the main menu, press the touch pad next to “USER SETTINGS”.
2. In each of the following screens, continue to press the touch pad
next to “MORE SETTINGS” until “ADJUST LIGHT SENSOR”
appears on the display.
3. Press the touch pad next to “LIGHTER” or “DARKER” to adjust the
setting between 1 (darkest) and 9 (lightest). Press the touch pad
next to “DONE” to lock in the desired setting.
Alarm Sound
The Alarm Sound preference allows you to turn off any audible alarms
(door open, too warm etc.) when quick and simple remedies are not
possible. It will not disable alarm features or visual displays.
1. On the main menu, press the touch pad next to “USER SETTINGS”.
2. In each of the following screens, continue to press the touch pad
next to “MORE SETTINGS” until “ALRM SOUND IS ON” appears
on the display.
3. Press the touch pad next to “ALRM SOUND IS ON” to switch
between ON and OFF. Press the touch pad next to “DONE” to lock
in the desired setting and return to the main menu.
User Settings
P
ro
d
u
ct
C
o
n
tr
o
ls
12
Temp Alarm (cont.)
1. On the main menu, press the touch pad next to “OPTIONS”.
2. In each of the following screens, continue to press the touch pad
next to “MORE OPTIONS” until “TEMP ALARM IS OFF” appears on
the display.
3. Press the touch pad next to “TEMP ALARM IS OFF” to switch
between ON and OFF. Press the touch pad next to “DONE” to lock
in the desired setting and return to the main menu.
Replace H2O Water Filter
See “Water Filtration System” section.
User Settings
The control center allows you to set user preferences, if desired.
Language
The Language preference allows you to change the control panel
display to English, French or Spanish.
1. On the main menu, press the touch pad next to “USER SETTINGS”.
2. Press the touch pad next to “SELECT LANGUAGE”.
3. Press the touch pad next to either “METTRE EN FRANÇAIS” or
“CAMBIAR EN ESPAÑOL.” Press the touch pad next to “CONFIRM”
to lock in the setting and return to the main menu.
Temperature Display
The temperature display preference allows you to change the
control panel display from degrees Fahrenheit to degrees Celsius.
1. On the main menu, press the touch pad next to “USER SETTINGS”.
2. Press the touch pad next to “FAHRENHEIT IS ON” to switch
between Fahrenheit and Celsius. Press the touch pad next to
“DONE” to lock in the desired setting and return to the main menu.
Options
P
ro
d
u
ct
C
o
n
tr
o
ls