Fm modulator playback, Ir headphones – Vizualogic Quantum Series User Manual
Page 7

14
7
FM Modulator Playback
(continued)
Monitor and pressing the FREQUENCY SELECT button. Each press of the
button advances the frequency as follows:
FM CH1 88.3MHz
FM CH2 88.7MHz
FM CH3 89.1MHz
FM CH4 89.5MHz
To turn the FM Modulator Off, aim the remote at the Overhead Monitor and
simply press the FM ON / OFF button again.
IR Headphones
The Vizualogic
®
Quantum™ Series Overhead System features integrated Infrared
(IR) transmitters on the front of each monitor. The Overhead Monitor transmits
on channel ‘A’ only. To listen to the source displayed on monitor, turn on
the headphones and ensure that they are set to channel ‘A.’ NOTE: Always
adjust volume control on the headphones to the lowest setting before turning
them on.
DVD FUNCTIONS
9. AUX DVD POWER – Press this
button to turn the (optional) ThinDVD
ON. Press the button again to turn the
ThinDVD OFF.
10. AUX DVD EJECT – Ejects disc from
the (optional) ThinDVD.
11. UP – Moves up within the DVD
SETUP menu.
12. DOWN – Moves down within the
DVD SETUP menu.
13. RIGHT – Moves right within the DVD
SETUP menu.
14. LEFT – Moves left within the DVD
SETUP menu.
15. ENTER – Confirms a selection.
16. RETURN – Return to previous menu
screen or playing point.
17. SETUP – Navigates SETUP MENU.
There are 4 pages to configure System
(1) General Setup Page.
(2) Audio Setup Page.
(3) Preference Page.
(4) Password Setup Page.
18. TITLE – Navigates the Title Menu on the disc.
19. MENU – Goes to the Root Menu on the disc.
20. AUDIO DOWN – Press this button to decrease playback volume.
15
9
14
16
11
10
13
18
19
12
20
17